KKSB Raspberry Pi ZERO Case (Black)
KKSB Raspberry Pi ZERO Case (Black)

KKSB Raspberry Pi ZERO Case (Black)

€5,90 €4,72

Are you looking for a reliable case for your Raspberry Pi ZERO board? Though Raspberry Pi ZERO is a tiny board still you can’t take things for granted. Check out this cute looking black metallic case for Raspberry Pi ZERO. This is the official release from KKSB-Cases. Its horizontal dimensions are almost similar to those of Raspberry Pi ZERO board. Not only that it is a compact enclosure, it really is fairly robust.  All necessary cutouts are there for Raspberry Pi ZERO connectors including USB, CSI, Ethernet, GPIO Header, etc.

This exclusive KKSB Raspberry Pi Zero case is a well-adapted solution for the major functions of the current Raspberry Pi Zero board. It is compact and robust, with a clean design.
This is a case fitting for serious users, enthusiasts, companies and anyone else who wants one of the best aesthetically pleasing cases for the Raspberry Pi Zero.

The case is laser cut steel that has been further finished with black powder-coating. The case is designed for good access to all connectors on the Raspberry Pi Zero card.
This case includes an exit slot at the top of the case, allowing a ribbon cable to be fitted to the board’s 40pin GPIO header. The board is clamped with four hexagonal standoffs and the lid is attached to these standoffs with screws.

Features of KKSB Case for Raspberry Pi ZERO

  • Official product from KKSB-Cases
  • The robust and reliable metallic build
  • Available in Black colour
  • Exclusive for Raspberry Pi ZERO
  • The package includes a crosshead screw and a couple of countersunk crosshead screws
  • The bottom of the case features pre-cut mounting holes
  • Cutouts for MicroUSB, GPIO Header, CSI connector v1.3, and USB Power Port
  • The dimensions of the case are 72mm x 34mm x 19mm

Description

KKSB case for Raspberry Pi ZERO is the perfect combination of robustness and beauty. The artistic craftsmanship is visible via the finely crafted “ZERO” on the case lid. This two-piece metallic case for your Raspberry Pi ZERO is simply one of its kind.

Includes

lid & bottom
2 cross head countersunk screws
1 cross-head screw

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
A.

Very nice and works well with the WH zero pi.
It has lateral openings for microSD and camera although in the photos as of June 2018 the camera opening can not be seen.
With the top part case in red and the bottom part case in green and the long screws in green and the short screw in red would be even more beautiful with the colors of the raspberry pi.
I would have given 1mm more height to the box to avoid touching the GPIO with the fingers and 2mm more to the long screws so that they penetrate more into the thread.
There is a good quality price relation.

*****

Muy bonita y funciona bien con la pi zero WH.
Tiene aberturas laterales para microSD y cámara aunque en las fotos a fecha Junio 2018 no se vea la abertura para cámara.
Con la parte superior en rojo y la parte inferior en verde y los tornillos largos en verde y el tornillo corto en rojo estaría aun más bonita con los colores de la raspberry pi.
Yo le hubiera dado 1mm mas de altura a la caja para no rozar con los dedos el GPIO y 2mm más a los tornillos largos para que penetren mas en la rosca.
Muy buena relacion calidad precio.

Related products

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
A.

Very nice and works well with the WH zero pi.
It has lateral openings for microSD and camera although in the photos as of June 2018 the camera opening can not be seen.
With the top part case in red and the bottom part case in green and the long screws in green and the short screw in red would be even more beautiful with the colors of the raspberry pi.
I would have given 1mm more height to the box to avoid touching the GPIO with the fingers and 2mm more to the long screws so that they penetrate more into the thread.
There is a good quality price relation.

*****

Muy bonita y funciona bien con la pi zero WH.
Tiene aberturas laterales para microSD y cámara aunque en las fotos a fecha Junio 2018 no se vea la abertura para cámara.
Con la parte superior en rojo y la parte inferior en verde y los tornillos largos en verde y el tornillo corto en rojo estaría aun más bonita con los colores de la raspberry pi.
Yo le hubiera dado 1mm mas de altura a la caja para no rozar con los dedos el GPIO y 2mm más a los tornillos largos para que penetren mas en la rosca.
Muy buena relacion calidad precio.