Raspberry Pi Pico H
Downloads
- Getting Started with Raspberry Pi Pico
- Raspberry Pi Pico Datasheet
- Pinout Diagram
- STEP File
- Design Files (Cadence Allegro)
- Fritzing Part (Raspberry Pi Pico)
- Fritzing Part (Raspberry Pi Pico H)
Raspberry Pi Pico series is based on the RP2040 chip. It is the first microcontroller from the Raspberry Pi. The controller board measures 51mmx 21mmx 1mm and the Micro-USB port is onboard to receive power and transfer data.
The RPi Pico H features 40 Pins (2.54mm / 0.1” pitch grid). Both breadboard and Veroboard are compatible with it as it has 1mm small holes. The 4x drilled (2.1mm / approx. 0.05mm) mounting holes support mechanical fixing.
Difference between Raspberry Pi Pico and Pico H
Pre-Soldered Headers: Raspberry Pi Pico H has pre-soldered headers. Whereas the Raspberry Pi Pico is a castellated module which allows the user to solder directly to the carrier board.
Keyed 3-Pin Connector: The Serial Wire Debug (SWD) 3-Pin header on the Pico H is broken out into a small Keyed 3-Pin connector.
The Serial Wire Debug (SWD) header on the Pico has 3 through-hole castellated pins near the edge of the board.
Raspberry Pi Pico Project Ideas
Getting Started with Raspberry Pi Pico
Specifications
- RP2040 microcontroller chip
- 264kB RAM
- 2Mbyte Flash
- Voltage Compatibility: 1.8 V / 3.3V I/O Voltage (3.3V is by default at RPi Pico)
- Micro USB Port for power and data interface (external batteries also supported)
- I/O Pins: 40x Pins (21x51 DIP) dual castellated
- 2x I2C
- 2x SPI
- 2x UART
- 26x 3.3V multi-function I/O GPIO
- 3 ADC capable pins
- 23 digital-only pins
- 16x PWM Channels
- Serial Wire Debug (SWD): 3-Pin ARM SWD Port
- Real-Time Counter is featured
- The timer possesses four alarms
- 2x IO (PIO) programmable blocks
- VGA and SD Card interface emulation supported
- Dimensions: 5.1cm x 2.1cm x 0.1cm / 51mm x 21mm x 1mm
Specifications of RP2040 Microcontroller
- Multi-bank 264kByte SRAM
- External Quad-SPI Flash
- Full-Crossbar Bus Fabric
- Cortex M0+ Dual-Core (133MHz Max.)
- On-Chip PLL supports variable core frequency
- USB: 1.1 on-board
- 500ksps 12-Bit ADC
Items Included
- Raspberry Pi Pico H (x1)
