GSM / GNSS / GPRS / Bluetooth HAT för Raspberry Pi

€34,90

Now you can easily connect to the wireless internet, make phone calls, send text messages, and transfer data via Raspberry Pi. Bluetooth/GPRS/GSM/GNSS HAT for Raspberry Pi performs these four major functions. In addition, this HAT also enables your Raspberry Pi to make use of the Global Positioning System. This HAT is a cost-effective option if you are looking to equip your Raspberry Pi with wireless-communication functions.

Features of Bluetooth/GPRS/GSM/GNSS HAT for Raspberry Pi

  • 40-Pin (Standard Raspberry Pi) GPIO
  • The module comes with the Bluetooth Antenna
  • Comes with an external GPS antenna
  • Features a GSM antenna
  • Supports Email, Text Messaging, Phone Calls, MMS, FTP, HTTP, GTMF, and GPRS, etc.
  • Supports LBS, GPS, Glonass, omni-positioning, and COMPASS
  • Bluetooth data transfer via Bluetooth 3.0
  • USB to UART (onboard CP2102) convertor for UART debugging
  • 6x Status indicator LEDs
  • SIM Card Slot (1.8V~3V) (The Offer DOES NOT include the SIM Card)
  • Features a Real-Time Clock
  • Backup battery holder to support the RTC
  • Buadrate (1200bps ~ 115200bps) Auto Detection
  • GSM 11.14 (99 SIM application toolkit) supported
  • SIMCOM/27.005, 27.007 3GPP TS AT Commands Control

Specs of GSM/GPRS

Band

  • Auto-Search (Quad-Band)
  • GSM 850/EGSM 900/DCS 1800/PCS
  • 1900MHz
  • 2/2+ GSM Phase Compliance

Emitting Power

  • Class 1 – 1W @DCS 1800/PCS (1900MHz)
  • Class 4 – 2W @ GSM 850/EGSM (900MHz)

GPRS Connectivity

  • Class 1~12 GPRS Multi-Slot (Configurable)
  • Class 12 GPRS Multi-Slot (Default)

GPRS Data Feature

  • Max. Uplink Speed – 85.6kb/s
  • Max. Downlink Speed – 85.6kb/s
  • PBCCH supported
  • USSD supported
  • Password Authentication Protocol (PAP) supported for PPP Connection

Coding Schemes

  • CS-1\CS-2\CS-3\CS-4

 

Miscellaneous Specs

SMS

  • MT/Text/CB/MO/PDU modes supported
  • SMS Storage on the SIM Card

Audio

  • Encode/Decode – Full-Rate/Half-Rate/Adaptive-Multi-Rate/Enhanced-Full-Rate modes supported
  • Noise reduction supported
  • Echo cancellation supported

GNSS

  • L1 C/A GPS Code
  • 33 Tracking Channels
  • 99 Acquisition Channels
  • -148dBm Cold Start
  • -165dBm tracking
  • Cold Start – 28 seconds (typ.)
  • Hot Start – Less than 1 second
  • Warm Start – 26 seconds
  • Accuracy - <2.5m (Horizontal Position) CEP

Bluetooth

  • 3.0 Bluetooth
  • Compliant with EDR
  • Supports AT Commands
  • Supports HSP/HFO/SPP/OPP

Voltage/Power

  • Compatible with 5V operating voltage

Temperature

  • Operating Temperature - -40°C ~ 85°C
  • Storage Temperature - -45°C ~ 90°C

Dimensions

  • 30.2mm x 65mm

Unboxing

  • 1x Bluetooth Antenna
  • 1x External GPS antenna
  • 1x GSM antenna
  • 1x GSM/GPRS/GNSS HAT for Raspberry Pi
  • 1x USB Type-A to MicroUSB Cable
  • 2x Screws (For Raspberry Pi)

Disclaimer

  • SIM Card is NOT included
  • Raspberry Pi is NOT included

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)