LoRaWAN Gateway HAT for Raspberry Pi SX1302 868M EU868 GNSS L76B

Sold out
€132,38 €105,90

This LoRaWAN Gateway HAT is compatible with Raspberry Pi motherboards. It features the SX1302 868M LoRaWAN Gateway. It is ideal for Long-Range transmission, large capacity node, concurrent communication, and high receiving sensitivity. This LoRaWAN Gateway HAT comes with the L76B GNSS module. The base-board features the Mini PCIe socket.

Raspberry Pi Compatibility

This LoRaWAN Gateway HAT features the 40 Pin standard Raspberry Pi extension header. You can use it with most Raspberry Pi series boards. The L76B GNSS module supports GPS / BD for accurate location and clock information. Manual and development resources are included with examples in C.

Features of LoRaWAN Gateway HAT for Raspberry Pi

  • Semtech SX1302 normal band – upgraded performance
  • SX1250 radio RF front-end chip
  • EU868 band compatible
  • LNA and PA onboard | 26 dBm emit power | -141 dBm receiving gain high sensitivity
  • Supports 10x signal channels and multiple nodes concurrent communication
  • Forward Error Correction (FEC) Algorithm
  • Spreading Factor SF5 ~ SF12
  • 19 Kbps (SF5 / BW125 KHz) Data Rate
  • Easy integration to the embedded systems via Mini PCIe Socket and SPI communication protocol support
  • Longer Distance, Fast Data Rate, Lower Power Consumption

Specifications of LoRa Gateway Module for Raspberry Pi

  • Compatible Power Supply: 5V
  • Frequency Range: EU868 | 863 MHz ~ 870 MHz
  • Modulation: LoRa / (G) FSK
  • Emit Power: > 26 dBm @ 5V
  • Receiving Sensitivity (SF12): -121 dBm @ 125 KHz
  • Receiving Sensitivity (SF12): -141 dBm @ 125 KHz
  • Power Consumption (Emitting): 710 mA @ 5V (GPS On)
  • Power Consumption (Receiving): 99 mA @ 5V (GPS On)
  • Power Consumption (Sleep): 41 mA @ 5V (GPS Off)
  • Communication Bus: I2C, SPI
  • External Connector: Mini PCIe
  • Operating Temperature: From -40oC to 85oC
  • Dimensions: 50.95mm x 30mm | 5.095cm x 3.0cm

Specifications of L76B GNSS Module

  • Frequency Range (BD2 B1): 1561.098 MHz
  • Frequency Range (GPS L1): 1575.42 MHz
  • Positioning Accuracy: < 2.5m CEP
  • Receiving Sensitivity (Acquisition): -148 dBm
  • Receiving Sensitivity (Tracking): -163 dBm
  • Receiving Sensitivity (Re-Acquisition): -160 dBm
  • Communication Bus: UART
  • Dimensions: 65mm x 56.50mm | 6.5cm x 5.65cm

Hardware Components

  • LoRaWAN Gateway Module SX1302 868M
  • Mini PCIe Buckle and Socket
  • GNSS Module L76B
  • Power Chip RT9193-33
  • Power (PWR) Status Indicator
  • PPS: GPS Status Indicator
  • UART RX / TX Indicator
  • 40 Pin Raspberry Pi GPIO Header
  • Antenna Connector for L76B GNSS Module
  • LoRa Gateway Antenna Connector
  • Battery Holder (Compatible with rechargeable ML 1220 battery)

Note: Battery is NOT included

Items Included

  • LoRaWAN Gateway HAT SX1302 (X1)
  • LoRaWAN Gateway Module SX1302 868M (x1)
  • GPS Antenna (x1)
  • Antenna 868M 5 dBi (x1)
  • Dual IPEX1 Wire (x1)
  • Female Pin Header 2x 20 Pin (x1)
  • Pack of Screws

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)