SX1262 868M LoRa Node Expansion Module for Raspberry Pi Pico
Current Price
€17,90
Original Price
€254,38
Download User Manual SX1262 LoRa Node Module
The SX1262 LoRa Node Module is compatible with Raspberry Pi Pico. The module supports 868MHz LoRaWAN protocol.
The SX1262 is the improved revision of the SX127X series. You can use this module to solve the balancing complications between power consumption, interference immunity, and transmission distance. The LoRa WAN 868MHz protocol lets you connect ChirpStack and TTN servers via LoRa gateway. It optimises the speed of LoRa cloud service as well.
SX1262 LoRa Node Application Examples
- Smart Home
- Industrial Control
- Data Acquisition
Features of SX1262 LoRa Node Expansion Module
- Compatibility: Compatible with standard Raspberry Pi Pico Header
- Protocol: LoRaWAN Protocol | 868M (863MHz ~ 870MHz) Frequency Band
- Temperature Compensation: Crystal Oscillator for active temperature compensation – more reliable in low and high temperature conditions
- Modulation Support: LoRa, GFSK, FSK modulation support – Ultra-long communication distance and block resistance
- Battery Holder / Recharge Controller: PH1.25 battery holder | supports rechargeable lithium battery | 3.7V 600mAh Li-Po battery is included
- Sensitivity: Up to -148 dBm receiving sensitivity | up to 22 dBm programable emitting power
- Preamble Detection: Data package engine up to 256 bytes with CRC
Specifications of SX1262 LoRa Node Expansion Module
- Modulation: LoRa, FSK, and GFSK
- RFID: SX1262
- Receiving Current: 5.3mA @ 125KHz
- Emitting Current: 118mA @ 22dBm
- Communication Bus: SPI
- Operating Voltage: 3.3V
- Operating Temperature: -40oC ~ 85℃
- Weight: 33 Grams
Dimensions
2.1cm x 5.2cm | 21mm x 52mm
Compatible with Raspberry pi Pico Header
Female Pin Header Onboard | Connects directly to Raspberry Pi Pico
Hardware Components
- Raspberry Pi Pico Header
- Status Indicators – PWR power indicator and CHG recharge indicator
- RF Switch Control – Control by High Level or GPIO22
- Recharge IC MCP73831
- SX1262 Module
- Antenna Connector IPEX
- Power switch
- Battery Header PH1.25
Pinout Definition 
Items Included
- LoRa SX1262 868M
- Antenna 2DB (x1)
- Li-Po Battery 600mAh 3.7V (x1)
- IPEX1 to SMA wire (x1)
Raspberry Pi Pico is sold separately.
