Raspberry Pi Zero WH Kit with UPS HAT 1.3 inch LCD HAT 1000mAh Battery

€76,13 €60,90

Download RPi Zero WH Kit Resources and Guide

This Raspberry Pi Kit includes Raspberry Pi Zero WH, a UPS HAT, a 1000mAh Li-Poly Battery, and a 1.3 inch LCD HAT. The purpose of this kit is to provide a Display and UPS combination with Raspberry Pi Zero WH without having to look for an external power supply. It is a ready-to-go kit since the items are compatible with Raspberry Pi Zero WH.

Specifications of Raspberry Pi Zero WH

  • Processor: Broadcom 1GHz BCM2835 Single-Core ARM11 Processor
  • Memory: 512MB RAM
  • Wireless LAN: WiFi 802.11 b / g / n
  • Bluetooth: Version 4.1 Bluetooth Low Energy (BLE)
  • GPIO: Pre-soldered 40 Pin GPIO Header
  • Storage Support: Micro SD Card Slot (Card is NOT included)
  • Video Output: Mini HDMI Port supports 1080p @ 60fps
  • USB: Micro USB Power Port | Micro USB OTG Port
  • Camera Support: CSI Camera Connector
  • Headers: Composite Video Header | Composite Reset Header
  • Weight: 14 Grams
  • Dimensions: 65mm x 30mm x 11.6mm | 6.5cm x 3.0cm x 1.16cm

Specifications of 1.3 inch LCD HAT

  • GPIO Extension Header: Standard 40-PIN GPIO extension header (suitable for most Raspberry Pi boards)
  • Interface: Compatible with the SPI communication interface
  • Onboard Controller: ST7789 embedded driver chip
  • Resources: examples, manuals, and development resources included for Raspberry Pi
  • Control Buttons: 3x Pushbuttons and 1x Joystick and
  • LCD Type: In Plane Switching (IPS) Display Panel
  • Display Colors: Multicolor RGB
  • Color Levels / Bit Depth: 65K
  • Display Resolution: 240x240 pixels
  • Display Size: 1.3-inch Diagonal
  • Illumination: LED backlight
  • Operating Voltage: Compatible with 3.3V compatible
  • Weight: 14 grams
  • Dimensions: 65.0mm x 30.2mm | 6.5cm x 3.02cm

Specifications of UPS HAT

  • Pins: Spring Pogo Pins on board to connect with Raspberry Pi Zero board
  • Battery Chip: Recharge chip for Li-Po battery | Dynamic path management | Stable power supply
  • Power Output: 5V regulated power output | Voltage boost chip
  • Communication Bus: I2C bus communication | Real Time monitoring of current, voltage, remaining battery, and power
  • Battery Protection: Multiple protection circuits against over charge / discharge, over current, and short circuit
  • Indicator: Recharging indicator
  • Constant Power Supply: Can recharge the battery via external power supply and yield power output at the same time
  • Automatic Switching: Automatically switches to battery output if the external power supply is not available (This function requires a Micro SD Card – this offer does NOT include the card)

Items Included

  • Raspberry Pi Zero WH (x1)
  • LCD HAT 1.3 inch (x1)
  • UPS HAT (x1)
  • Li-Poly Battery 1000mAh (x1)
  • Protection Panel Top (Black Acrylic) (x1)
  • Protection Panel Bottom (Black Acrylic) (x1)
  • Pack of Screws

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)