Raspberry Pi Pico RP2040 Microcontroller
Getting Started with Raspberry Pi Pico
Download Raspberry Pi Pico Datasheet
Raspberry Pi Pico is the first microcontroller from the Raspberry Pi Foundation. It is a small controller board i.e., 51mm x 21mm x 1mm, and contains the RP2040 chip. This board has a Micro-USB port that supports power as well as a data interface. Edges of the board feature dual-castellated pins. This design is suitable for both the surface line module and DIP (Dual In-line Package). The RPi Pico features 40 Pins (2.54mm / 0.1” pitch grid). Both breadboard and Veroboard are compatible with it as it has 1mm small holes. The 4x drilled (2.1mm / approx. 0.05mm) mounting holes support mechanical fixing.
Raspberry Pi Pico Project Ideas
Getting Started with Raspberry Pi Pico
Specifications of Raspberry Pi Pico
- Made by Raspberry Pi Foundation
- RP2040 microcontroller chip
- 264kB RAM
- 2Mbyte Flash
- Voltage Compatibility: 1.8 V / 3.3V I/O Voltage (3.3V is by default at RPi Pico)
- Micro USB Port for power and data interface (external batteries also supported)
- I/O Pins: 40x Pins (21x51 DIP) dual castellated
- 2x I2C
- 2x SPI
- 2x UART
- 26x 3.3V multi-function I/O GPIO
- 3 ADC capable pins
- 23 digital-only pins
- 16x PWM Channels
- Serial Wire Debug (SWD): 3-Pin ARM SWD Port
- Real-Time Counter is featured
- The timer possesses four alarms
- 2x IO (PIO) programmable blocks
- VGA and SD Card interface emulation supported
- Dimensions: 5.1cm x 2.1cm x 0.1cm / 51mm x 21mm x 1mm
Specifications of RP2040 Microcontroller
- Multi-bank 264kByte SRAM
- External Quad-SPI Flash
- Full-Crossbar Bus Fabric
- Cortex M0+ Dual-Core (133MHz Max.)
- On-Chip PLL supports variable core frequency
- USB: 1.1 on-board
- 500ksps 12-Bit ADC




Items Included
- Raspberry Pi Pico (x1)