Raspberry Pi 4 Model B Standard Kit (4GB RAM and 32GB MicroSD)

Save 10%
Original Price €106,50
Current Price €119,81 €95,85

This kit includes the following items

  • 1x Raspberry Pi 4 Model B 4GB RAM
  • 1x KKSB Case for Raspberry Pi 4
  • 1x Set of 3-in-1 Heatsinks for Raspberry Pi 4B
  • 1x 5V/3A USB C DC Power Supply (EU Plug)
  • 1x 32GB MicroSD Card (Samsung EVO+)

Raspberry Pi 4 Model B

  • Processor: 1.5GHz Broadcom Quad-Core Cortex-A72 64-Bit ARM v8 BCM2711 SoC
  • RAM: 4GB LPDDR4-3200 SDRAM
  • Networking: IEEE 802.11ac Wireless (2.4GHz and 5.0GHz) | Bluetooth 5.0 | BLE Gigabit Ethernet
  • USB Ports: 2x USB 3.0 and 2x USB 2.0
  • USB Ports: 2x USB 3.0 | 2x USB 2.0
  • GPIO: 40-Pin Header (Standard Raspberry Pi)
  • Display Connector: 2-Lane MIPI DSI
  • Camera Connector: 2-Lane MIPI SCI
  • Video: 4-Pole Port supports stereo audio and composite video | 2x Micro-HDMI (Up to 4Kp60 supported) | H.265 4Kp60 decode | H264 1080p30 encode | 1080p60 decode | OpenGL ES 3.0 Graphics support
  • Recommended Power Supply: 5V/3A DC via USB-C (MicroUSB has been replaced with USB-C)
  • Storage: Micro SD Card Slot
  • Weight: 45 grams / 1.6 ounces
  • Dimensions: 85mm x 56mm x 17mm

KKSB Case for Raspberry Pi 4

  • Powder-coated top and anodized bottom
  • Two rows of air vents at the top
  • Clearly labeled cutouts for 2x HDMI, Audio, USB Type C, 2x USB 2.0, 2x USB 3.0, Ethernet, LED, Micro SD, etc.
  • Compatible with active and passive heatsinks, different hats such as POE Hat
  • Rubber feet and screws included

3-in-1 Heatsink Set for Raspberry Pi 4

This 3-in-1 heat sink kit is designed for Raspberry Pi 4 and Raspberry Pi 3B +. The dimensions of the heat sink fit the chips on the compatible boards. The set consists of a copper heat sink and two aluminum heat sinks (1 blue and 1 black).

Copper heat sink with self-adhesive sticker

  • Efficient thermal conductivity
  • Copper is safe against corrosion
  • The melting point of copper is high so it does not expand quickly
  • The density of the copper is approximately 0.321 lb / in³
  • The tensile strength of copper is about 310 MPa
  • Best heat control when overclocking

5V/3A USB-C Power Supply Charger

  • Supports AC input 100~240V at 50/60Hz
  • Supports DC output 5V/3A
  • Comes with a USB Type-C interface
  • Features an EU adapter plug
  • The approximate length of the cable is 100cm

32GB Samsung EVO+ MicroSD Memory Card

  • The card type is Micro SDXC
  • The card supports the UHS-I interface
  • The dimensions of the card are 15mm x 11mm x 1mm
  • It belongs to Speed Class-10
  • It features the Speed Grade-1
  • Write Speed of this card is up to 20MB/s
  • Read Speed of this card is up to 80MB/s
  • It supports an operating voltage range from 2.7V to 3.6V
  • The operating temperature ranges from -25oC to 85oC
  • The storage temperature ranges from -40oC to 85oC
  • Water Proof (Up to 72 Hours under seawater)
  • Magnetic Field Resistance (Up to 15000 Gauss)
  • X-Ray Resistant
  • The durability of this card has been tested for up to 10k Mating Cycles
  • The certifications for this card include NATA, CE, FCC, and VCCI

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)