RAK831 LoRa LoRaWAN Gateway Developer Kit SX1301 FT2232 USB-I2C GPS and LoRa Antenna 470MHz

€178,63 €142,90

Download Sources and Documentation

This is the RF Front End LoRa Gateway Module RAK831 with Semtech SX1301 baseband processor. This LoRa / LoRaWAN Gateway developer kit supports the 470MHz frequency band. RAK831 module can demodulate the LoRa signal even if the spreading factor of the sending Node is unknown.

Why Use RAK831 LoRaWAN Gateway Developer Kit?

RAK831 is an easily portable compact module ideal for developing the LoRa system. The FT2232 USB to SPI converter module supports quick development on the connected computer. You can also integrate the LoRa Gateway concentrator module easily to LoRa functions. RAK831 kit is ideal for a variety of applications including intelligent farming, smart grids, and other IoT applications. It works with many host systems such as Raspberry Pi or other OpenWRT-based or WisCam. The processor on the host system can be an MCU or a PC. You can connect the system with RAK831 via the SPI or USB interface. The kit supports true antenna diversity or simultaneous dual-band operation. Any combination of spreading factor and intermediate frequency for up to 8 packets is possible

Features of RAK831 LoRa / LoRaWAN Gateway Developer Kit

  • Supports 470MHz Frequency Band (465MHz – 475MHz)
  • Ideal for many applications such as gas instruments, street lamps, municipal pipelines, and landfills, agricultural irrigation, livestock, hydrology and weather data collection, remote operations, and data collection for mines.
  • LPWAN – Low-Power Consumption Solution
  • 3 km range in an urban area and 15 km range in an open area (can penetrate harsh environments)
  • Narrow Band data transmission supported
  • Supports 8 channels

Specifications of RAK831 LoRa / LoRaWAN Gateway Developer Kit

  • Baseboard Processor: Semtech SX1301
  • Frequency Band: 470 MHz
  • Interfaces: Supports SPI and USB interfaces
  • Output Power Level: 23 dBm maximum
  • Optimized RF Interface: 50 Ohm for simple integration with the system
  • Operating Temperature: From -40oC to 85oC
  • SX1257 Tx/Rx Front End Sensitivity: Down to -142.5 dBm
  • CW Interferer Rejection: 70dBm at 1 MHz offset
  • Negative SNR /CCR: Operates with 9dBm maximum
  • Demodulators: 49x LoRa and 1x FSK / GFSK
  • Demodulation Paths: 10x programmable parallel demodulation paths
  • Radio Interface: TX and RX dual digital front-end interfaces
  • DDR: Supports Dynamic Data Rate Adaption
  • Operating Voltage: 5V DC
  • Firmware: Gateway HAL
  • Dimensions: 8cm x 5cm x 0.5cm | 80mm x 50mm x 5mm

Applications of RAK831 LoRa / LoRaWAN Gateway Developer Kit

  • Remote Controls
  • Wireless Sensor
  • Smart Metering
  • Wireless Star Networks
  • M2M
  • Wireless Security and Alarm Systems
  • IoT
  • Industrial Automation
  • Home Automation

Items Included

  • RAK831 Module
  • LoRa Antenna

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)