Odroid H3
Please click the link below to download the user guide for Odroid H3 and H3+.
Getting Started with Odroid H3 and H3+
Odroid H3 is the upgrade of the now-obsolete Odroid H2+. The form factor has not changed however, the performance and power have been enhanced. Odroid H3 is a 64-bit x86 SBC with advanced IO ports and support for larger dual-channel memory.
Odroid H3 Hardware Layout
|
A. Intel Celeron N5105 Processor |
B. SO-DIMM DDR4 Slots (x2) |
|
C. PCIe Module Socket NGFF-2280 M.2 (x1) |
D. eMMC Socket (x1) |
|
E. SATA Power Connectors (x2) |
F. SATA3 Data Connectors 6.0 GB/s (x2) |
|
G. DC Power Jack (x1) |
H. USB 3.0 Ports (x2) |
|
I. USB 2.0 Ports (x2) |
J. HDMI 2.0 Port (x1) |
|
K. DisplayPort DP 1.2 (x1) |
L. Ethernet Ports RJ45 (x2) |
|
M. System LED Indicators (x5) |
N. 24 Pin Expansion Header (x1) |
|
O. Power Switch (x1) |
P. Reset Switch (x1) |
|
Q. 2 Pin Backup Battery Connector (x1) |
R. 4-Pin Fan Connector (x1) |
|
S. Audio Out, Audio In, SPIDIF Out (x1 each) |
|
Specifications of Odroid H3
Processor
- Intel Celeron N5105
- 9 GHz Quad-Core
- TDP 10W, 10nm
- L2 Cache 4MB
- Intel UHD Graphics, 900 MHz 24/32 EU
RAM Support
- SO-DIMM Slots for DDR4 (x2) | 1.2V
- Up to 2933 MT/sec. Dual Channel | DDR4-PC23400
- Support for up to 64GB of Total Memory
- DDR5 and DDR3 are NOT compatible
Storage Support
- eMMC Socket (x1) | Selectable and Bootable on BIOS
- SATA3 6.0 GB/s Data Connectors (x2)
- 2 Slot (x1) | Supports 4x PCIe 3.0 and NGFF-2280 card
- 2 SATA SSD is NOT compatible
Networking
- Realtek RTL8125B
- RJ45 LAN Ports (x2) GbE Ethernet Support 10/100/1000/2500 Mbps
- Wake-On-Lan Support
- LED Indicators (Amber for Traffic and Green for Link)
Video
- HDMI 2.0 Port (x1) supports up to 4K @60Hz
- DisplayPort DP 1.2 supports up to 4K @60Hz
- Supports simultaneous dual display
Audio
- Audio Out Jack 3.5mm (x1)
- SPDIF Out (x1) HAD and ALC1200 Codec Support
- DP and HDMI also support Audio Output
External I/O
- USB 2.0 HOST Ports (x2)
- USB 3.0 HOST Ports (x2)
- Peripheral Expansion Header 2.54mm Pitch 24 PIN
- DC 5V (x1)
- DC 3.3V (x1)
- GND (x5)
- UART (x1) | RTS, TXD, TXD, CTS
- I2C (x2) SDA, SCL
- External Power Button (x1)
- USB 2.0 Ports (x3)
- HDMI CEC, 5VA+
- All 3.3V I/O Signal Level
Power Input Compatibility
- DC Power Jack 5.5mm Outer (-ve) and 2.1mm Inner (+ve) | DC 14V ~ 20V up to 60W
- DC 15V / 4A Power Supply is recommended if you are not using 2x 3.5” HDDs
- DC 19V / 7A Power Supply is recommended if you are using 2x 3.5” HDDs
Power Consumption
- CPU Stress: ≃15W
- IDLE: ≃9W
- CPU and GPU Stress: ≃18W
- Suspend: ≃6W
- Power OFF: ≃25W
General Features
- BIOS Backup Battery for BIOS Settings and Time Tracking
- Passive Heatsink
- Supports optional Active Cooling Fan (Not included)
- Reset Button
- Power Button
- PWR LED (Red) while the DC power supply is connected
- SLEEP LED (Blue - Left) while the system is in the Sleep Mode
- PMIC LED (Blue – Right) while the major power rails are at work
- SATA LED (Amber) flashes while DATA is transferring data
- NVMe LED (Green) flashed while NVMe is transferring data
Odroid H3 Dimensions
- 11cm x 11cm x 4.7cm | 110mm x 110mm x 47mm
Items Included
- Odroid H3
