ODROID GO Advance Black Edition with Aura Black Cover

SKU G200513062627

ODROID-GO Advance (Black Edition) is Pre-Order (Advance Booking) Product. You expect the dispatch from our end during the First Week of July 2020. However, amid the COVID-19 Lockdown, we can’t exercise any control over international shipping services in the case of unexpected delays.

ODROID-GO Advance (Black Edition) is available in a couple of variants. However, hardware and software specifications are identical, the difference of the variants is based on the color of the enclosure. This particular variant features Aura Black cover. The other variant features Clear Transparent cover.

ODROID-GO Advance (Black Edition) can run the following Gaming Emulators:

  • Game Gear
  • GB
  • GBA
  • GBC
  • Atari Lynx
  • Atari 7800
  • Atari 2600
  • Atari 5200
  • Mega Drive
  • Master System
  • SNES
  • NES
  • PSP
  • PSX
  • Sega CD
  • PC Engine CD
  • PC Engine

Important Note:

  • The speed of some ROMs is not optimal on ODROID-GO Advance (Black Edition)
  • The Micro SD Card is NOT included in the package (You will need an 8GB or Higher Card)
  • Force Power OFF is recommended only in an unavoidable situation where you find no other solution to properly switch OFF the module. If you have no option but to Force Power OFF, keep ON/OFF Button pressed for approximately 6 seconds.

How to Assemble ODROID-GO Advance (Black Edition)?

How to Disassemble ODROID-GO Advance (Black Edition)? 

Specifications of ODROID-GO Advance (Black Edition)

  • SoC: RockChip RK3326
  • Processing Capability: 1.3GHz Quad-Core ARM Cortex-A53
  • Graphics Processing Unit: Mali-G31 GPU (Dvalin)
  • Memory: 32-Bits Bus 1GB DDR3L 786MHz
  • Storage: MicroSD Card Slot (UHS-1 Compatible) | Booth SPI Flash (16Mbytes) – MicroSD Card is NOT included
  • Display: 3.5-inch TFT LCD 320x480p with ILI9488, MIPI interface
  • Battery: 3000mAh 3.7 V Li-Polymer Battery (Up to 9 hours of gaming type after full charging)
  • Audio: 0.5Watt 8Ω Mono Earphone Jack
  • DC Jack: Compatible with 5V Input | USB-C Power Connector (Charging Cable included in the package)
  • External I/O: 10-Pin Port (I2C, GPIO, IRQ at 3.3Volt) | 1x HOST USB 2.0
  • Input Buttons: Right Shoulder 1 & 2, Left Shoulder 1 & 2, 6x F1 to F6 buttons, Direction Pad, A, B, X, Y buttons, Analog joystick
  • Wireless: Built-in 2.4GHz ESP-WROOM-S2 802.11b/g/n
  • Power Consumption (Game Emulation): From 300mA to 550mA (Depends on backlight brightness, game emulation type, and usage of wireless connectivity). For lesser power consumption, turn OFF WiFi.
  • Power Consumption (Power OFF Mode): Less than 1mA
  • Charging Time (When Playing Games): From 4 hours to 5 hours
  • Charging Time (When Module is OFF): From 2.5 hours to 4 hours
  • Weight: 6 oz | 0.18 kg | 180 grams
  • Dimensions in cm: 15.5cm x 7.2cm x 2cm
  • Dimensions in inches: 6.1 x 2.8 x 0.8 inch
  • Dimensions in mm: 155mm x 72mm x 20mm

Items Included

  • Aura Black Top Enclosure
  • Aura Black Bottom Enclosure
  • USB Type-C Power Cable
  • Plastic Buttons: Power, L, L2, R, R2, X, Y
  • Plastic Buttons: Direction Pad, A & B buttons
  • ODROID-GO Advance Board (Black Edition)
  • 3000mAh Li-Polymer Battery
  • LCD Window
  • Direction Pad (Rubber)
  • From F1 to F6 Rubber Buttons
  • A, B, X, Y Rubber Buttons
  • Analog Joystick
  • Battery Sticker
  • 5-ich TFT LCD 320x480p
  • 5Watt Mono Speaker
  • (1.7x8) Screws (x4)
  • (1.7x5) Screws (x7)
  • Driver

Customer Reviews

No reviews yet

Customer Reviews

No reviews yet