ODROID-C4
ODROID-C4 is a faster and more efficient version of ODROID-C2. ODROID-C2 is the first low price 64-bit, ARM-based SBC. ODROID-C4 contains Mali-G31 New Generation Graphics Processing Unit and it runs at 2.0 GHz with Quad-Core Cortex-A55 cluster. The stock heatsink in the latest version prevents thermal throttling from suffering. This is because ODROID-C4 allows the processor to run at full speed to prevent any damage to thermal throttling. The newer version has also improvised in two things compared to its older version: Faster CPUs and RAMS, i.e. 40% and 50% faster respectively.
Hardware Components on ODROID-C4
- Amlogic S905X3 CPU
- 4 GiB DDR4
- USB 3.0 Host Ports (x4)
- 10/100/1000 M Ethernet Port RJ45
- DC Power Jack (2.1mm inner and 5.5mm outer diameter)
- Micro USB 2.0 OTG (x1)
- System Indicator LED (x2)
- 7 Pin Audio Expansion Header
- UAT for System Console (x1)
- 40 Pin Expansion Header
- HDMI 2.0
- IR Receiver (x1)
- Micro SD Slot (x1)
- eMMC Module Socket (x1)
Specifications of ODROID-C4
|
Processor
|
· Amlogic S905X3 12nm · Mali-G31 MP2 GPU (650MHz) 4x Execution Engines · Architecture: ARMv8-A with Crypto and Neon extensions · 512KB L3 data cache, 512 sets 16-way set associative, 4 processors share 64-byte lines · 32 KB L1 data cache, 128 sets 4-way set associative, 1 processor shares 64-byte lines · 32 KB L1 instruction cache, 128 sets 4-way set associative, 1 processor shares 64-byte lines
|
|
RAM |
· 4GiB DDR4 · Bus width: 32-bit · Low Power Design: 1.2Volt Data Rate: 2640 MT/s · Grade: PC4-21333
|
|
Storage |
· 1x Micro SD Slot (Compatible with DS/HS mode and supports UHS-1 SDR104) · 1x eMMC Socket (eMMC module is NOT included)
|
|
Networking |
· 1x RJ45 GbE LAN Port | supports 10/100/1000 Mbps · Supports WiFi USB adapters (NOT INCLUDED) · RTL8211F Realtek Ethernet Transceiver · Green LED: 100Mpbs connection data traffic indicator · Amber LED: 1000Mpbs connection data traffic indicator · 128 sets 4-way set associative, 1 processor shares 64-byte lines |
|
Video |
. 1x HDMI 2.0 Port with HDR, EDID, CEC | up to 4K @ 60Hz
|
|
Audio |
. 1x SPDIF (OPTIONAL) Optical Output · 1x HDMI Digital Audio Output
|
|
External I/O
|
· 1x OTG USB 2.0 Port for Device or Host Mode (DOES NOT support Power Input) · 4x HOST USB 3.0 Ports (Single Root Hub Shared) · 1x UART (Serial Console Debug) · 1x 2.54mm Pitch 40-Pin Peripheral Expansion Header
· 1x 7-Pin 2.54mm Pitch Audio Expansion Header
|
|
General |
· IR receiver for infrared remote control · System Indicator LEDs · RED LED for PWR (DC Power Connected) · BLUE (Kernel is running) |
|
power |
· 1x DC Power Jack: 5.5mm (negative / outer) and 2.1mm (positive / inner) diameter · 12V / 2A DC Power Adapter Recommended · 5.5V ~ 15.5V DC Input
|
|
Form Factor
|
· Dimensions of the Heat Sink: 40mm x 32mm x 10mm | 4cm x 3.2cm x 1cm · Dimensions of the Board: 85mm x 56mm x 1.0mm | 8.5cm x 5.6cm x 1cm · Weight (including Heat Sink): 59 Grams | 0.059 Kg |
