NanoPi R2S with CNC Case and USB C Cable
Download NanoPi R2S Beginner’s Guide
The NanoPi R2S features the 1.3 GHz Quad-Core Cortex-A53 Rockchip RK3328, 1GB DDR4 RAM, edge-computing support, and Dual Gbps Ethernet. It comes with the exclusive CNC case that supports most interfaces and connectors of the NanoPi R2S mini-router. The R2S mini-router also has the RK805 PMU chip. Dynamic frequency scaling is supported by this board. The USB 2.0 Port on R2S supports USB WiFi modules, USB HD cameras, and USB 4G modules, etc. This mini-router is compatible with Ambian, UbuntuCore, and FriendlyWrt, etc. They are Linux-5.4 (LTS) based software. It supports the TF card for boot purposes. The mainline versions are also supported by OpenWrt. For power input, the NanoPi R2S has a Type-C USB port compatible with 5V / 2A power supply.
Dual Gbps Ethernet Ports
The NanoPi R2S has WAN and LAN ports. The WAN port is the direct extension from the SoC whereas the LAN port is a USB3.0 conversion. The TX and RX rates of both Gpbs Ethernet interfaces are the same, i.e., 941 Mbps.
Features of NanoPi R2S CNC Metal Case
- Dimensions: 6.1cm x 6cm x 2.75cm | 61mm x 60mm x 27.5mm
- Color: Black
- Cutouts for Interfaces: USB 2.0, WAN, LAN, USB Type C (Power In / Slave), Reset Key, Status LEDs (SYS, LAN, WAN), Micro SD Card Slot
- Heat Management: Built-in Heatsink Design
Specifications of NanoPi R2S
- CPU: Rockchip RK3328 | 1.3 GHz Quad-Core Cortex-A53 (1.2 GHz by default)
- Memory: 1GB DDR4 RAM
- Networking: 2x Gbps Ethernet Ports 10M / 100M / 1000M | 941 Mbps TX and RX Rate
- External Storage: 1x Micro SD Card Slot | Supports up to 128 GB Card (Card is NOT included)
- USB: 1x USB 2.0 Type-A HOST | 1x USB Type-C Power Input and Slave (5V/2A Power Supply Compatible)
- Serial Debug Port: 3-Pin Header (3.3V TTL) Serial Debug 2.54mm Pitch
- LED Indicators: 1x LAN LED (Green) | 1x WAN LED (Green) | 1x SYS LED (Red)
- Button: 1x Power Key
- Operating Temperature: From 0℃ to 80℃
- Power: Compatible with 5V / 2A DC Power Supply
- Operating System Support: Ubuntu Core 18.04 (64-bit) Linux-5.4 + U-boot-2017.11 | FriendlyWrt 19.07.1 (64-bit)
- PCB: 6 Layer
- Weight (Including CNC Case): 115 Grams
- Dimensions: 5.56cm x 5.2cm | 55.6mm x 52mm
Items Included
- NanoPi R2S (x1)
- CNC Metal Case (x1)
- USB C Cable Approximately 30cm Long (x1)
