NanoPi M4V2 (4GB RAM)

€93,90

NanoPi M4V2 (4GB) is basically the upgrade on NanoPi M4 (2GB). The titles are suggestive of the fact that the major difference between these Mini PCs is the capacity of RAM. NanoPi M4V2 replaces the 2GB LPDDR3 with the 4GB LPDDR4 RAM. The rest of the features are the same on both NanoPi M4 versions except that NanoPiM4V2 has two new buttons – a Power Button and a Recovery Button. NanoPi M4V2 is an 85mmx56mm Microcontroller equipped with a variety of important hardware and interfaces. Considering the form factor, this Mini PC looks identical to Raspberry Pi 3 Model B+. The similar form factor enables NanoPi M4V2 to support ports and interfaces on Raspberry Pi 3B+. As far as the processor is concerned, NanoPi M4V2 contains the Quad-Core Cortex-A53 along with the 64-bit Dual-Core Cortex-A72 (1.5HGz and 2.0GHz respectively). It contains the Rockchip RK3399 SoC. In addition, it has Mali-T864 GPU and 4GB Dual-Channel DDR4 RAM. You can boot the RAM by using a TF Card or the external eMMC module. NanoPi M4V2 (4GB) has a WiFi/BT combo module that supports 2.4G and 5G. It also has a Gbps Ethernet port, 4x USB3.0 Type-A interfaces, 1x HDMI 2.0 Type-A port, 3.5mm Audio Jack, Type-C Port, and 40-Pin GPIO (Raspberry Pi Compatible). Moreover, NanoPi M4V2 has 2x PCIe, 1x USB 2.0, 1x eMMC socket, 1x Dual MIPI-CSI camera interface, and an RTC port.

CPU

  • 64-Bit Dual-Core Cortex-A72 and Quad-Core Cortex A-53
  • Based on Rockchip RK3399 SoC
  • Up to 1.5GHz (Cortex-A53) and up to 2.0GHz (Cortex-A72)

Graphics Processing Unit

  • Mali-T864 GPU
  • Supports OpenGL ES 1.1/2.0/3.0/3.1
  • Supports OpenCL
  • Supports DX11
  • Supports AFBC

Vision Processing Unit

  • Dual VOP
  • 10-Bit 4K support
  • VP9 4K support
  • H265/H264 decoding @60fps

RAM

  • 4GB
  • DDR4 Dual-Channel

Storage

  • MicroSD Slot (external storage compatible with up to 128 GB)
  • eMMC Socket (There is NO eMMC Module on NanoPi M4V2)

Power Management

  • Cooperated independent DC/DC
  • PMIC RK808-D
  • DVFS enabling
  • RTC Wake-Up
  • System Sleep Mode
  • Software power-Down

Connectivity

  • WiFi: 802.11 a/b/g/n/ac
  • Bluetooth: BT 4.1
  • Ethernet: Native Gbps Ethernet
  • Interface: Dual Antenna Interface
  • WiFi/Bluetooth Combo Module
  • 2x2 MIMO

Audio / Video Support

  • 1x 3.5mm Headphone Jack (Dual-Channel) for audio output
  • 1x Microphone interface to support audio input
  • Dual ISP video input support
  • 4-Lane MIPI-CSI Camera Interface supports video input
  • Simultaneous (Dual-Camera) video input support
  • Up to 13Mpix/s
  • 1x 2.0a HDMI supports video output / 4K compatible @60Hz
  • 4/2.2 HDCP video output support
  • 1x 4-Lane MIPI-DSI video output support

Interfaces / GPIO and other specs

  • 4x USB 3.0 ports (Type-A)
  • 1x USB (Type-C) supports OTG USB 2.0 and Power Input
  • 2x USB HOST supported via GPIO2 2.54mm pitch Pin-Header
  • GPIO1: 2.54mm Pitch – 40-Pin GPIO (Compatible with Raspberry Pi)
  • 1x SPI 3V
  • 1x SPDIF_TX
  • 1x UART 3V
  • 1x I2S (8-channel) 1.8V
  • 3x I2C 3V/1.8V
  • GPIO2: 2.54mm pitch – 24-Pin
  • 1x PWM
  • 2x PCIe
  • 2x HOST USB 2.0 (native/independent) interfaces
  • 54mm Pitch – 4-Pin Header / Serial Debug Port / 3V Level / 15000000bps
  • 1x Recovery Key
  • 1x Power Key
  • 1x Power Indicating LED (RED Light)
  • 1x GPIO Controlled LED (Green Light)
  • RTC Battery 2-Pin input connector – 1.27/1.25mm
  • DC Power 5V/3A Compatible
  • Operating Temperature ranges from 20℃ to 70℃

Operating System and Software Support

  • Android 8.1
  • FriendlyCore 18.04 (64-Bit)
  • Lubuntu 16.04 (32-Bit)
  • FriendlyDesktop 18.04 (64-Bit)
  • Compatible with U-boot-2014.10 kernel version
  • Compatible with Linux-4.4-LTS kernel version

Form Factor

  • NanoPi M4V2 (4GB) weighs 50.62 grams
  • Number of Board Layers: 8 Layers
  • Outline Dimensions: 8.5cm x 5.6cm / 85mm x 56mm

Description of NanoPi M4V2 with 4GB RAM

A couple of PCIe interfaces on NanoPi M4V2 expand the functionality of Gbps Ethernet, SATA, USB 3.0/3.1, WiFi, and SSD storage. It is good to see that NanoPi M4V2 (4GB RAM) works with a variety of operating systems and supports the latest Linux and U-boot kernel versions. If you are looking for reliable Mini PC to support the applications involving robots, deep learning, machine learning, industrial control, blockchain, advertisement machines, game machines, and industrial cameras, then NanoPi M4V2 (4GB) is a considerable option.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)