NanoPi 4x SATA HAT for M4


The NanoPi 4x SATA HAT comes with 5V and 12V supportive 4-Pin power connector. This NanoPi SATA HAT is compatible with M4 Microcontrollers. 4x SATA ports on this HAT support 1.5Gbps, 3Gbps, and 6Gbps communication rates. The 4x SATA HAT for NanoPi M4 has the ability to carry large currents. There are four LEDs (status indicators) each representing one SATA port. The DC-Jack and 5566-04A connectors support 12V power input. In addition, the NanoPi 4x SATA HAT contains a DC/DC regulator (12V~5V) that can generate an output current of up to 8A. There is a PowerKey Button and a PowerKey Jumper on 4x SATA HAT for NanoPi M4. In addition, the board has 2x USB 2.0 (PH2.0 HOST) 4-Pin connectors.

Specs of NanoPi 4x SATA HAT for M4

  • 88SE9215 (Marvell) SATA I/O Controller / Four-Port – 6Gbps
  • The board has 4 SATA Ports
  • Supports 6Gbps, 3Gbps, and 1.5Gbps Communication Rates
  • Carries large currents thanks to the 4-Pin Power Connector (supports 12V and 5V output)
  • Each SATA port has its own Status Indicator LED
  • 12V input power supported by the 5.5mmx2.1mm DC-Jack
  • 12V input power is also supported by the 5566-04A
  • 12V~5V DC/DC regulator / capable of generating up to 8A of output current
  • 1x PowerKey Button
  • 1x PowerKey Jumper
  • 1x Fan Connector - 2-Pin PH2.0
  • 2x 4-Pin USB 2.0 (HOST PH2.0)
  • 12V output modulator PWM1
  • 12V/2A DC power support (sufficient for a 3.5-inch Hard Disk or 4x 2.5-inch Hard Disks)
  • FriendlyCore 18.04 (64-Bit) compatible
  • FriendlyDesktop 18.04 (63-bit) compatible
  • Lubuntu 16.04 (32-Bit) Compatible
  • Linux-4.4-LTS Kernel Version Compatible
  • U-boot-2014.10 Kernel Version Compatible
  • Designed to work with NanoPi M4 Boards
  • Weight: 33.48 grams
  • Outline Dimensions: 6.5cm x 5.6cm / 65mm x 56cm


The NanoPi 4x SATA HAT for M4 allows you to mount the heatsink with the help of a couple of nuts. You can also connect the cooling fan with this HAT using the 2-Pin PH2.0. NanoPi M4 board starts getting power supply as soon as you connect the 4x SATA HAT with it. It means that there is no need to arrange for the additional power through Type-C cable for NanoPi M4 as long as the 4x SATA HAT is connected.

Customer Reviews

No reviews yet