Raspberry Pi Environment Sensor HAT BME280 LTR390-UV-1 ICM20948 TSL25911FN SGP40
€24,90
Download Environment Sensor HAT Sources and User Guide
The Raspberry Pi Environment Sensor HAT comes with multiple sensors and it supports the I2C bus to communicate with the connected Raspberry Pi board. This Environment Sensor HAT comes with the following main sensing capabilities:
- Ambient Light Sensor
- IR / UV Sensor
- VOC Sensor
- Accelerometer
- Gyroscope
- Magnetometer
- Barometer
- Temperature Sensor
- Humidity Sensor
Not only that Raspberry Pi Environment Sensor HAT collects data from the environment but it is also useful for building the motion and orientation detection robot.
Features of Environment Sensor for Raspberry Pi
- Compatible with Raspberry Pi motherboards | 40 Pin Raspberry Pi standard GPIO extension header
- TSL25911FN ambient light sensor onboard | measures visible light and IR light intensity
- BME280 sensor onboard | measures air pressure, humidity, and temperature
- LTR390-UV-1 sensor onboard | measures the intensity of Ultraviolet (UV) rays
- SGP40 sensor onboard | Detects ambient Volatile Organic Compounds (VOC) in the air
- I2C bus communication support
- Manual and development resources included with examples for Raspberry Pi, STM32, and Arduino
Specifications of TSL25911FN Digital Ambient Light Sensor
- I2C Address: 0x29
- Effective Range: 0 ~ 88000 Lux
Specifications of BME280 Air Pressure, Humidity, and Temperature Sensor
- I2C Address: 0x76
- Temperature Detection Range: From -40℃ to 85℃ (±1℃ accuracy | 0.01℃ resolution)
- Humidity Detection: Up to 100% RH (1s response time, ±3%RH accuracy, 0.008% RH resolution, ≤2%RH delay)
- Air Pressure Detection: From 300 hPa to 1100 hPa (±1 hPa accuracy | 0.18 Pa resolution)
Specifications of ICM20948 Motion Sensor
- DOF: 9-DOF 3-Axis Accelerometer | 3-Axis Magnetometer | 3-Axis Gyroscope
- I2C Address: 0x68
- Accelerometer Resolution: 16 Bit
- Accelerometer Range: Configurable Range ±2g, ±4g, ±8g, ±16g
- Gyroscope Resolution: 16 Bit
- Gyroscope Range: Configurable Range ±250 °/sec, ±500 °/sec, ±1000 °/sec, ±2000 °/sec (°/sec = Degrees per Second)
- Magnetometer Resolution: 16 Bit
- Magnetometer Range: ±4900 µT
Specifications of LTR390-UV-1 UV Sensor
- I2C Address: 0x53
- Wavelength Response Range: 280 nm ~ 430nm
Specifications of SGP40 VOC Sensor
- I2C Address: 0x59
- Measuring Range: 0 ~ 1000 ppm (ethanol equivalent)
- Limit Condition (Ethanol Equivalent): < 0.05 ppm
- Limit Condition (Preset Concentration Point): 10%
- Response Time: Less than 10 seconds (tau 63%)
- Start Time: Less than 60 seconds
- Humidity Compensation: On-chip support
Voltage Specifications
- Logic Level Conversion: 3.3V to 1.8V
- Voltage Regulator: 5V to 3.3V / 1.8V
Form Factor
- Weight: 18 Grams
- Dimensions: 65mm x 30mm | 6.5cm x 3.0cm
Items Included
- Environment Sensor HAT for Raspberry Pi (x1)
- 4 PIN Header (x1)
- Female Header 2x20 Pin (x1)
- Screws
