1200x825p 9.7-inch E-Ink Display HAT for Raspberry Pi


This 9.7-inch display HAT for Raspberry Pi features a high-quality 1200x825p resolution. It is an E-Ink display that has an IT8951 controller. It supports I80, SPI, I2C, and USB interfaces. The 9.7-inch E-Ink Display HAT for Raspberry Pi supports partial refresh and its view angle is wider because of the high contrast black-and-white colors. It is an ultra-low consumption display that is often recommended for shelf labels and industrial instruments.

Features of 1200x825p 9.7-inch E-Ink Display HAT for Raspberry Pi

  • There is no backlight which means that even if the power is down, the E-Ink display can keep working for a long time
  • The power is required during refreshing so this display is power-efficient
  • 40-Pin GPIO compatible (Supports Standard Raspberry Pi GPIO)
  • Connects with Nucleo or Raspberry Pi via SPI, I80, USB, or I2C

Specifications of 1200x825p 9.7-inch E-Ink Display HAT for Raspberry Pi

  • Compatible Operating Voltage: 5V
  • Supported Interfaces: I2C, SPI, I80, and USB
  • Dimensions of the screen: 202.8mm x 139.425mm
  • Outline (Edge-to-Edge) Dimensions: 218.8mm x 156.425mm x 1.15mm
  • View Angle > 170o
  • Total Standard Power: 0.3W (typ.)
  • 1-4 Bit / 2-16 Grayscale
  • Full Refresh Time is less than 1 second
  • Total Refresh Power: 0.6W (typ.)
  • Black and White display colors (High Contrast)
  • Screen Resolution: 1200x825p
  • Weighs only 0.299 Kg / 299 grams
  • 169x0.169 Dot-Pitch


  • 1x 9.7-inch e-Paper
  • 1x e-Paper Adapter
  • 1x Driver HAT for e-Paper (IT8951)
  • 1x PH2.0 20cm (8-Pin)
  • 1x Same-Side-Contact 33-Pin FFC
  • 1x USB Type-A to Micro B cable
  • 2x Screws (for Raspberry Pi)


  • Raspberry Pi is NOT included

Customer Reviews

No reviews yet