UNO R3 SMD Clone ATmega328 CH340
€9,90
This UNO R3 Clone is the customised modification based on the Arduino UNO R3. This board has a 16 MHz ATmega328 processor with CH340 serial to USB converter. This board has the Surface Mounted Diode (SMD) version of the processor.
In addition to the usual female I/O connectors, the board also has a row of holes next to each pin header. You can use these lines to solder wires and additional female or male connectors. You can solder them on either side (top or bottom) of the board.
A strip of male connectors is included in the package.
There is a row of solder points on the board that provide optional access to Serial (TX/RC), I2C (SCL/SDA), GND and 3.3V/5V.
You can program the UNO R3 clone (SMD) using the Arduino IDE via the USB port.
Specifications
- Microcontroller: ATmega328P
- Clock Speed: 16 MHz
- SRAM: 2 Kbytes
- Flash: 32 Kbytes
- EEPROM: 1 Kbyte
- Chip Mounting: Surface Mounted Diode (SMD)
- Serial to USB Converter: CH340
- Voltage Compatibility: 7V ~ 12V
- Operating Voltage: 5V
- Digital I/O Pins: 14 Pins
- PWM I/O Pins: 6 Pins (Shared with the Digital I/O)
- Analog Input Pins: 6
- LED: Built-in LED (fixed to the digital I/O Pin 13)
- DC Current from 3.3V Pin: 50mA
- DC Current from each I/O Pin: 20mA per pin
- USB Interface Type: Type-B (Female)
- Weight: 26.2 Grams
- Dimensions of the Board: 6.88cm x 5.34cm | 68.8mm x 53.4mm
- Dimensions including connector: 7.7cm x 5.34cm | 77mm x 53.4mm
Items Included
- UNO R3 SMD Clone (x1)
- Male Header Strip 40-Pin (x1)