1200x825p 9.7-inch E-Ink Display HAT for Raspberry Pi
€145,90
Getting Started with E-Ink HAT
This 9.7-inch display HAT for Raspberry Pi features a high-quality 1200x825p resolution. It is an E-Ink display that has an IT8951 controller. It supports I80, SPI, I2C, and USB interfaces. The 9.7-inch E-Ink Display HAT for Raspberry Pi supports partial refresh and its view angle is wider because of the high contrast black-and-white colors. It is an ultra-low consumption display that is often recommended for shelf labels and industrial instruments.
Features of 1200x825p 9.7-inch E-Ink Display HAT for Raspberry Pi
- There is no backlight which means that even if the power is down, the E-Ink display can keep working for a long time
- The power is required during refreshing so this display is power-efficient
- 40-Pin GPIO compatible (Supports Standard Raspberry Pi GPIO)
- Connects with Nucleo or Raspberry Pi via SPI, I80, USB, or I2C
Specifications of 1200x825p 9.7-inch E-Ink Display HAT for Raspberry Pi
- Compatible Operating Voltage: 5V
- Supported Interfaces: I2C, SPI, I80, and USB
- View Angle > 170o
- Total Standard Power: 0.3W (typ.)
- 1-4 Bit / 2-16 Grayscale
- Full Refresh Time is less than 1 second
- Total Refresh Power: 0.6W (typ.)
- Black and White display colors (High Contrast)
- Screen Resolution: 1200x825p
- Weighs only 0.299 Kg / 299 grams
- 169x0.169 Dot-Pitch
- Dimensions of the screen: 202.8mm x 139.425mm
- Outline (Edge-to-Edge) Dimensions: 218.8mm x 156.425mm x 1.15mm
Dimensions of the HAT
SPI Pin Definition for Raspberry Pi
Unboxing
- 1x 9.7-inch e-Paper
- 1x e-Paper Adapter
- 1x Driver HAT for e-Paper (IT8951)
- 1x PH2.0 20cm (8-Pin)
- 1x Same-Side-Contact 33-Pin FFC
- 1x USB Type-A to Micro B cable
- 2x Screws (for Raspberry Pi)
Disclaimer
- Raspberry Pi is NOT included
