ODROID N2 Plus (N2+) with 2GByte RAM

Name: ODROID N2 Plus (N2+) with 2GByte RAM
Brand: Hardkernel
SKU: G200702239826
Price: 98.9 EUR
Availability: InStock

€98,90

Quantity

Odroid Cases, Boards & Accessories Shop - All products

The ODROID-N2+ is the revision on the ODROID-N2. The latest version has the following major upgrades:

ODROID N2+	ODROID-N2
Up to 2.4GHz Quad-Core Cortex-A73	Up to 1.8GHz Quad-Core Cortex-A73
Up to 2.0GHz Dual-Core Cortex-A53	Up to 1.9GHz Dual-Core Cortex-A53
Comes with the Backup Battery Holder which is mounted on the N2+ Board	The N2 Board did not have the on-board backup battery
The height of the heatsink is lower, i.e. 1.875cm or 18.75mm	The height of the heatsink is comparatively taller, i.e. 2.4cm or 24mm

The ODROID-N2 and N2+ microcontrollers are the upgrades of N1 and come with the Quad-Core Cortex-A73 cluster along with the Dual-Core Cortex-A53. The processing unit is powered by big-Little architecture. ODROID-N2+ comes with the Mali-G52 Graphics Processing Unit which is the same GPU you find on the ODROID-N2. The metal-housing heatsink efficiently dissipates heat and protects the CPU from thermal-throttling. The Cortex-A73 reaches 2.4GHz with the help of the 12nm silicon technology. The CPU of ODROID-N2+ is 20% faster as compared to the speed of the CPU of ODROID-N1. Similarly, the GPU of N2 is also 10% faster as compared to that of N1. The 2GB RAM @1320MHz consumes on 1.2volts. For optimized thermal-characteristics, the CPU of ODROID-N2+ is on the bottom of the board.

ODROID-N2 Plus (N2+) Board Components

CPU – S922X
4x DDR4
BMib SPI Flash x1
Boot Select SPI Switch x1
10/100/1000 RJ45 x1
eMMC Socket x1
MicroSD Slot x1
HDMI 2.0 x1
IR Receiver x1
USB 3.0 x4
RTC Battery Backup Holder x1
LED Indicators x2
2-Pin Active Cooling Fan Connector x1
DC Power Jack x1
Audio/Video Output (Composite Video & Stereo Audio) x1
40-Pin GPIO Header
UART (Supports System Console) x1
OTG MicroUSB 2.0 x1

ODROID-N2 Specifications

Processor

12nm fab – Amlogic S922X
2.4GHz Cortex-A73 / Quad-Core
2.0GHz Cortex-A53 / Dual-Core
ARMv8-A (with Crypto Extension and Nano Extension)
Mali-G52 Graphics Processing Unit /800MHz/ 6 Execution Engines

Memory

2GB DDR4
Bus Width: 32bit
Grade – PC4-21333
2640 MT/s – Data Rate
Low-Power Consumption – 1.2Volt

Storage

1x MicroSD Slot
HS/DS Modes
1x eMMC Connector

Networking

1x RJ-45 Gigabit Ethernet
10/100/1000 Mbps supported
Ethernet Transceiver: RTL8211F Realtek
2x LED Indicators (Amber = 1000Mbps / Green = 100 Mbps)
USB WiFi Adapter Supported (Optional | Not included in the package)

Video

1x 3.5mm Composite Video Jack
1x HDMI 2.0
CEC, HDR, EDID support up to 4K@60Hz

Audio

1x Digital Output (HDMI)
1x 3.5mm Jack Line-Out (Stereo Audio)
1x Optical SPDIF Output (Optional | Not included in the package)

External I/O

1x UARD Serial Debug
1x OTG USB 2.0 (Does NOT support power input)
4x HOST USB 3.0
1x 40-Pin Expansion Header (2.54mm Pitch)
2x 3.3V DC, 2x 5V DC, 1x 1.8V DC
8x GND
1x UART
1x SPI
2x I2C
2x ADC Input (Max. 1.8V / 10Bit)
25x GPIO (Maximum)

Compatible Power Supply

5.5mm (-ve) outer diameter and 2.1mm (+ve) inner diameter
12V/2A Power Supply is recommended
7.5V~18V DC (Max. 25W)

RTC Battery

· On-Board Real Time Clock IC

· Battery Holder (for CR2032 Coin Battery)

· Battery IS NOT Included

Weight

200 grams | 0.2 Kg (heatsink included)

Dimensions (Heatsink)

100mm x 91mm x 18.75mm

Dimensions (Board)

90mm x 90mm x 17mm

Disclaimer

This offer DOES NOT include Power Supply
RTC Battery is NOT included
eMMC Card is NOT included
Active Cooling Fan is NOT included

Description

ODROID-N1 came with Mali-T860MP4 which is good but Mali-G52 @800MHz on ODROID-N2+ is 10% faster than T860MP4. G-52 is the Bifrost-based Graphics Processing Unit. It is also known as MP6 because of its 6 execution engines (3x for each core). You could boot ODROID-N2+ via the SPI memory (on-board) rather than looking for the eMMC or MicroSD. Make sure to activate the eMMC hardware block because only then the SPI memory will be accessible on ODROI-N2+ at boot.