€112,50 €90,00

ODROID-N2 is the revision of N1 and comes with the Quad-Core Cortex-A73 cluster along with the Dual-Core Cortex-A53. The processing unit is powered by big-Little architecture. ODROID-N2 comes with the Mali-G52 Graphics Processing Unit. The metal-housing heatsink efficiently dissipates heat and protects the CPU from thermal-throttling. The Cortex-A73 reaches 1.8GHz with the help of the 12nm silicon technology. The CPU of ODROID-N2 is 20% faster as compared to the speed of the CPU of ODROID-N1. Similarly, the GPU of N2 is also 10% faster as compared to that of N1. The 4Gbyte DDR4 @1320MHz consumes on 1.2volts. For optimized thermal-characteristics, the CPU of ODROID-N2 is on the bottom of the board.

ODROID-N2 Board Components

  • CPU – S922X
  • DDR4 x4
  • BMib SPI Flash x1
  • Boot Select SPI Switch x1
  • 10/100/1000 RJ45 x1
  • eMMC Socket x1
  • MicroSD Slot x1
  • HDMI 2.0 x1
  • IR Receiver x1
  • USB 3.0 x4
  • 2-Pin RTC Battery Connector x1
  • LED Indicators x2
  • 2-Pin Fan Connector x1
  • Power Jack x1
  • Audio/Video Output x1
  • 40-Pin GPIO Header
  • UART x1
  • OTG MicroUSB 2.0 x1

ODROID-N2 Specifications




  • 12nm – Amlogic S922X
  • 1.8GHz Cortex-A73 / Quad-Core
  • 1.9GHz Cortex-A53 / Dual-Core
  • ARMv8-A (with Crypto Extension and Nano Extension)
  • Mali-G52 Graphics Processing Unit /846MHz/ 6 Execution Engines




  • 4GB DDR4
  • Grade – PC4-21333
  • 2640 MT/s
  • Low-Power Consumption – 1.2Volt




  • 1x MicroSD Slot
  • HS/DS Modes
  • Max. SDR104 UHS-1
  • 1x eMMC Connector (up to 128GB)




  • 1x RJ-45 Gigabit Ethernet
  • 10/100/1000 Mbps supported
  • RTL8211F Realtek
  • 2x LED Indicators (Amber = 1000Mbps / Green = 100 Mbps
  • USD WiFi Adapter Supported (Optional)




  • 1x 3.5mm Composite Video Jack
  • 1x HDMI 2.0
  • CEC, HDR, EDID support up to 4K@60Hz




  • 1x Digital Output (HDMI)
  • 1x 3.5mm Jack (Stereo Audio)
  • 1x Optical SPDIF Output (Optional)


External I/O


  • 1x UARD Serial Debug
  • 1x OTG USB 2.0 (Does NOT support power input)
  • 4x HOST USB 3.0
  • 1x 40-Pin Expansion Header (2.54mm Pitch)
  • 2x 3.3V DC, 2x 5V DC, 1x 1.8V DC
  • 8x GND
  • 1x UART
  • 1x SPI
  • 2x I2C
  • 2x ADC Input (Max. 1.8V / 10Bit)
  • 25x GPIO (Maximum)


Compatible Power Supply


  • 5.5mm (-ve) outer diameter and 2.1mm (+ve) inner diameter
  • 12V/2A Power Supply is recommended
  • 7.5V~18V DC (Max. 20W)




  • 190-grams (heatsink included)


Dimensions (Heatsink)


  • 100mm x 91mm x 24mm


Dimensions (Board)


  • 90mm x 90mm x 17mm



  • This offer DOES NOT include Power Supply


ODROID-N1 came with Mali-T860MP4 which is good but Mali-G52 @846MHz on ODROID-N2 is 10% faster than T860MP4. G-52 is the Bifrost-based Graphics Processing Unit. It is also known as MP6 because of its 6 execution engines (3x for each core). You could boot ODROID-N2 via the SPI memory (on-board) rather than looking for the eMMC or MicroSD. Make sure to activate the eMMC hardware block because only then the SPI memory will be accessible on ODROI-N2 at boot.

Customer Reviews

No reviews yet

Customer Reviews

No reviews yet