Raspberry Pi 4 Model B Standard Kit (8GB RAM and 32GB MicroSD)
Current Price
€113,85
Original Price
€126,50
This kit includes the following items
- 1x Raspberry Pi 4 Model B 8GB RAM
- 1x KKSB Case for Raspberry Pi 4
- 1x Set of 3-in-1 Heatsinks for Raspberry Pi 4B
- 1x 5V/3A USB C DC Power Supply (EU Plug)
- 1x 32GB MicroSD Card (Samsung EVO+)
Raspberry Pi 4 Model B
- Processor: 1.5GHz Broadcom Quad-Core Cortex-A72 64-Bit ARM v8 BCM2711 SoC
- RAM: 8GB LPDDR4-3200 SDRAM
- Networking: IEEE 802.11ac Wireless (2.4GHz and 5.0GHz) | Bluetooth 5.0 | BLE Gigabit Ethernet
- USB Ports: 2x USB 3.0 and 2x USB 2.0
- USB Ports: 2x USB 3.0 | 2x USB 2.0
- GPIO: 40-Pin Header (Standard Raspberry Pi)
- Display Connector: 2-Lane MIPI DSI
- Camera Connector: 2-Lane MIPI SCI
- Video: 4-Pole Port supports stereo audio and composite video | 2x Micro-HDMI (Up to 4Kp60 supported) | H.265 4Kp60 decode | H264 1080p30 encode | 1080p60 decode | OpenGL ES 3.0 Graphics support
- Recommended Power Supply: 5V/3A DC via USB-C (MicroUSB has been replaced with USB-C)
- Storage: Micro SD Card Slot
- Weight: 45 grams / 1.6 ounces
- Dimensions: 85mm x 56mm x 17mm
KKSB Case for Raspberry Pi 4
- Powder-coated top and anodized bottom
- Two rows of air vents at the top
- Clearly labeled cutouts for 2x HDMI, Audio, USB Type C, 2x USB 2.0, 2x USB 3.0, Ethernet, LED, Micro SD, etc.
- Compatible with active and passive heatsinks, different hats such as POE Hat
- Rubber feet and screws included
3-in-1 Heatsink Set for Raspberry Pi 4
This 3-in-1 heat sink kit is designed for Raspberry Pi 4 and Raspberry Pi 3B +. The dimensions of the heat sink fit the chips on the compatible boards. The set consists of a copper heat sink and two aluminum heat sinks (1 blue and 1 black).
Copper heat sink with self-adhesive sticker
- Efficient thermal conductivity
- Copper is safe against corrosion
- The melting point of copper is high so it does not expand quickly
- The density of the copper is approximately 0.321 lb / in³
- The tensile strength of copper is about 310 MPa
- Best heat control when overclocking
5V/3A USB-C Power Supply Charger
- Supports AC input 100~240V at 50/60Hz
- Supports DC output 5V/3A
- Comes with a USB Type-C interface
- Features an EU adapter plug
- The approximate length of the cable is 100cm
32GB Samsung EVO+ MicroSD Memory Card
- The card type is Micro SDXC
- The card supports the UHS-I interface
- The dimensions of the card are 15mm x 11mm x 1mm
- It belongs to Speed Class-10
- It features the Speed Grade-1
- Write Speed of this card is up to 20MB/s
- Read Speed of this card is up to 80MB/s
- It supports an operating voltage range from 2.7V to 3.6V
- The operating temperature ranges from -25oC to 85oC
- The storage temperature ranges from -40oC to 85oC
- Water Proof (Up to 72 Hours under seawater)
- Magnetic Field Resistance (Up to 15000 Gauss)
- X-Ray Resistant
- The durability of this card has been tested for up to 10k Mating Cycles
- The certifications for this card include NATA, CE, FCC, and VCCI
