{"title":"Display Cases \u0026 Stands","description":"\u003cp\u003eCases and stands that combine a Raspberry Pi 5 with the official Raspberry Pi Touch Display 2 — 7-inch and 5-inch versions — in desktop, adjustable-stand, HAT-ready and panel-mount designs, plus display stands for older Raspberry Pi screens.\u003c\/p\u003e","products":[{"product_id":"kksb-case-with-adjustable-stand-for-arduino-giga-wifi-and-giga-display-shield","title":"KKSB Case with Adjustable Stand for Arduino GIGA R1 WiFi and GIGA Display Shield","description":"\u003cp\u003eAluminium case with adjustable steel stand for the Arduino GIGA R1 WiFi together with the GIGA Display Shield, with a 360° ball swivel, clear polycarbonate back and front camera header. Requires both boards. Designed in Sweden by KKSB Cases.\u003c\/p\u003e\u003ch2\u003eSpecifications at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible board\u003c\/strong\u003e: Arduino GIGA R1 WiFi together with Arduino GIGA Display Shield (both required – does not fit the GIGA R1 WiFi alone)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort access\u003c\/strong\u003e: 1 × USB-C (labelled “Power, Programming \u0026amp; HID”), 1 × USB Type-A (labelled “Host”), 3.5 mm audio jack (labelled “Audio In\/Out”), camera header on the front and pin header cutouts in the clear back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButtons\u003c\/strong\u003e: 2 push buttons included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Front opening for the GIGA Display Shield; camera module can be rotated in 4 angles on the front plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminium case, clear crack-resistant polycarbonate back, steel stand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Rotatable stand with 360° ball swivel; standard tripod thread; can be placed on a table or mounted on a wall or ceiling; stand removable for flat wall or desktop placement; rubber feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions\u003c\/strong\u003e: 187 × 102 × 45 mm; shipping weight 270 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box\u003c\/strong\u003e: Case, rotatable stand, 2 × push buttons, camera header, fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: Arduino GIGA R1 WiFi, Arduino GIGA Display Shield, camera module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\u003c\/strong\u003e: 7350001161693\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMade for Arduino GIGA R1 WiFi with GIGA Display Shield\u003c\/li\u003e\n\u003cli\u003eAdjustable stand with 360° ball swivel to rotate and tilt\u003c\/li\u003e\n\u003cli\u003eStandard tripod thread; table, wall or ceiling mounting\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate back with cutouts for pin headers and visible LEDs\u003c\/li\u003e\n\u003cli\u003eFront camera header – camera module can be rotated in 4 angles\u003c\/li\u003e\n\u003cli\u003eLabelled access to USB-C, USB-A and audio jack\u003c\/li\u003e\n\u003cli\u003eAssembly instructions via QR code on the packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB-Cases","offers":[{"title":"Default Title","offer_id":47585768669518,"sku":"7350001161693","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0248\/6557\/0909\/files\/DSC03001.jpg?v=1782287832"},{"product_id":"kksb-display-stand-for-raspberry-pi-5-touch-display-v2-with-case-for-hats","title":"KKSB Display Stand for Raspberry Pi 5 \u0026 Official 7-inch Touch Display V2 with Case for HATs","description":"\u003cp\u003eDisplay stand with a metal case for the Raspberry Pi 5 and the official 7-inch Raspberry Pi Touch Display 2, with room for most HATs and a 360° ball-joint stand. Designed in Sweden by KKSB Cases.\u003c\/p\u003e\u003ch2\u003eSpecifications at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible board\u003c\/strong\u003e: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Official 7-inch Raspberry Pi Touch Display 2 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible HATs\u003c\/strong\u003e: Most Raspberry Pi HATs; long and short spacers included for HATs with long or short GPIO headers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort access\u003c\/strong\u003e: 2 × USB 3.0, 2 × USB 2.0, 1 × Gigabit Ethernet; three small openings on the top edge of the case matching the USB-C and 2 × micro-HDMI positions; side access for a 40-pin GPIO cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower button\u003c\/strong\u003e: External button integrated in the case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Ventilation slots in both side panels; room for low-profile heatsinks or coolers; included 40-pin stackable header leaves airflow space between a heatsink\/short cooler and a HAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e: Side-panel ventilation slots can be removed for HATs with connectors in different positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand\u003c\/strong\u003e: Ball joint with 360° rotation for angle adjustment; vertical display orientation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Sandblasted black anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions\u003c\/strong\u003e: 217 × 130 × 42 mm; shipping weight 550 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box\u003c\/strong\u003e: Display stand with case, 40-pin stackable header, long and short spacers, screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: Raspberry Pi 5, Touch Display 2, HATs, cooler\/heatsink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\u003c\/strong\u003e: 7350001162041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHolds the official 7-inch Touch Display 2 and the Raspberry Pi 5 in one unit\u003c\/li\u003e\n\u003cli\u003eBall-joint stand with 360° rotation for adjusting the viewing angle\u003c\/li\u003e\n\u003cli\u003eRoom for most HATs – long and short spacers included\u003c\/li\u003e\n\u003cli\u003e40-pin stackable header included for airflow between heatsink\/cooler and HAT\u003c\/li\u003e\n\u003cli\u003eExternal power button in the case\u003c\/li\u003e\n\u003cli\u003eRemovable side-panel ventilation slots for HATs with side connectors\u003c\/li\u003e\n\u003cli\u003eSandblasted anodized aluminium case and powder-coated steel stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB Cases","offers":[{"title":"Default Title","offer_id":50895492153678,"sku":"7350001162041","price":33.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0248\/6557\/0909\/files\/DSC03273.jpg?v=1737024289"},{"product_id":"kksb-display-stand-for-raspberry-pi-touch-display-2-with-case-for-raspberry-pi-5","title":"KKSB Display Stand for Official 7-inch Raspberry Pi Touch Display 2 with Raspberry Pi 5 Case","description":"\u003cp\u003eDisplay stand with a compact metal case for the Raspberry Pi 5 and the official 7-inch Raspberry Pi Touch Display 2, on a 360° ball-joint stand. No space for HATs. Designed in Sweden by KKSB Cases.\u003c\/p\u003e\u003ch2\u003eSpecifications at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible board\u003c\/strong\u003e: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Official 7-inch Raspberry Pi Touch Display 2 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible HATs\u003c\/strong\u003e: None – the compact case has no space for HATs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort access\u003c\/strong\u003e: 2 × USB 3.0, 2 × USB 2.0, 1 × Gigabit Ethernet; side access for a 40-pin GPIO cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower button\u003c\/strong\u003e: External button integrated in the case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Ventilation slots in both side panels; room for the official Raspberry Pi heatsink or other low-profile heatsinks\/coolers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand\u003c\/strong\u003e: Ball joint with 360° rotation for angle adjustment; vertical display orientation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Sandblasted black anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions\u003c\/strong\u003e: 197 × 128 × 16 mm; shipping weight 530 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box\u003c\/strong\u003e: Display stand with metal case, screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: Raspberry Pi 5, Touch Display 2, HATs, cooler\/heatsink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\u003c\/strong\u003e: 7350001162096\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHolds the official 7-inch Touch Display 2 and a Raspberry Pi 5 together\u003c\/li\u003e\n\u003cli\u003eBall-joint stand with 360° rotation\u003c\/li\u003e\n\u003cli\u003eCompact case – room for low-profile heatsinks, no space for HATs\u003c\/li\u003e\n\u003cli\u003eExternal power button in the case\u003c\/li\u003e\n\u003cli\u003eVentilation slots in both side panels\u003c\/li\u003e\n\u003cli\u003eSide access for a 40-pin GPIO cable\u003c\/li\u003e\n\u003cli\u003eSandblasted anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB Cases","offers":[{"title":"Default Title","offer_id":50896234348878,"sku":"7350001162096","price":32.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0248\/6557\/0909\/files\/DSC03259.jpg?v=1737033202"},{"product_id":"kksb-case-for-raspberry-pi-5-touch-display-2-desktop-orientation","title":"KKSB Case for Raspberry Pi 5 \u0026 Official 7-inch Touch Display 2 - Desktop Orientation","description":"\u003cp\u003eMetal case for the Raspberry Pi 5 and the official 7-inch Raspberry Pi Touch Display 2 in desktop orientation, standing on four angled feet for counters and desks. Designed in Sweden by KKSB Cases.\u003c\/p\u003e\u003ch2\u003eSpecifications at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible board\u003c\/strong\u003e: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Official 7-inch Raspberry Pi Touch Display 2 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible HATs\u003c\/strong\u003e: None – no space for HATs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort access\u003c\/strong\u003e: 1 × USB-C (power), 2 × micro-HDMI, 2 × USB 3.0, 2 × USB 2.0, 1 × Gigabit Ethernet, side access for a 40-pin GPIO cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower button\u003c\/strong\u003e: External button integrated in the case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Ventilation slots in both side panels; room for low-profile heatsinks or coolers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Desktop orientation on 4 angled feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Sandblasted black anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions\u003c\/strong\u003e: 197 × 128 × 16 mm; shipping weight 370 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box\u003c\/strong\u003e: Display stand with case, angled feet, screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: Raspberry Pi 5, Touch Display 2, HATs, cooler\/heatsink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\u003c\/strong\u003e: 7350001162058\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLow desktop orientation for counters, receptions and desks\u003c\/li\u003e\n\u003cli\u003eFour angled feet for stable placement\u003c\/li\u003e\n\u003cli\u003eCutouts for USB-C, 2 × micro-HDMI, 4 × USB and Gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003eExternal power button in the case\u003c\/li\u003e\n\u003cli\u003eRoom for low-profile heatsinks or coolers\u003c\/li\u003e\n\u003cli\u003eSide access for a 40-pin GPIO cable\u003c\/li\u003e\n\u003cli\u003eSandblasted anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB Cases","offers":[{"title":"Default Title","offer_id":50896894067022,"sku":"7350001162058","price":31.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0248\/6557\/0909\/files\/DSC03266.jpg?v=1737041129"},{"product_id":"kksb-panel-mount-case-for-raspberry-pi-5-touch-display-2","title":"KKSB Panel Mount Case for Raspberry Pi 5 \u0026 Official 7-inch Touch Display 2","description":"\u003cp\u003ePanel-mount housing for the official 7-inch Raspberry Pi Touch Display 2 with the Raspberry Pi 5 mounted on the open rear, for flush installation in walls and panels. Designed in Sweden by KKSB Cases.\u003c\/p\u003e\u003ch2\u003eSpecifications at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible board\u003c\/strong\u003e: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Official 7-inch Raspberry Pi Touch Display 2 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible HATs\u003c\/strong\u003e: Room for HATs, e.g. Raspberry Pi M.2 HAT+ (shown in photos)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort access\u003c\/strong\u003e: Raspberry Pi 5 sits on the open rear of the housing – its ports are reached directly behind the panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Space for low-profile heatsinks or the official Raspberry Pi 5 Active Cooler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Panel mount only: two mounting ears with slots; user makes the panel cutout (drawings and 3D model supplied)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Sandblasted black anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions\u003c\/strong\u003e: 220 × 135 × 23 mm; shipping weight 370 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box\u003c\/strong\u003e: Panel mount case, technical drawings for the panel cutout, 3D model file\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: Raspberry Pi 5, Touch Display 2, HATs, cooler\/heatsink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\u003c\/strong\u003e: 7350001162102\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFlush panel or wall installation for the 7-inch Touch Display 2\u003c\/li\u003e\n\u003cli\u003eMounting ears with slots on two sides\u003c\/li\u003e\n\u003cli\u003eDrawings and 3D model supplied for preparing the panel cutout\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 5 mounted on the rear with room for HATs\u003c\/li\u003e\n\u003cli\u003eSpace for the official Raspberry Pi 5 Active Cooler or low-profile heatsinks\u003c\/li\u003e\n\u003cli\u003eSandblasted anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003eDesigned for panel mounting only – not a standalone stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB Cases","offers":[{"title":"Default Title","offer_id":54840660984142,"sku":"7350001162102","price":17.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0248\/6557\/0909\/files\/DSC03371_main.jpg?v=1758152531"},{"product_id":"kksb-panel-mount-case-for-raspberry-pi-5-display-2-5inch","title":"KKSB Panel Mount Case for Raspberry Pi 5 \u0026 Display 2 (5inch)","description":"\u003cp\u003eSlim panel-mount housing for the Raspberry Pi 5 and the official 5-inch Raspberry Pi Display 2, with the Pi mounted on the open rear, for flush installation in walls and panels. Designed in Sweden by KKSB Cases.\u003c\/p\u003e\u003ch2\u003eSpecifications at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible board\u003c\/strong\u003e: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Official 5-inch Raspberry Pi Display 2 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible HATs\u003c\/strong\u003e: Most Raspberry Pi HATs and add-on boards (third-party HAT compatibility not guaranteed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort access\u003c\/strong\u003e: Raspberry Pi 5 sits on the open rear of the housing – its ports are reached directly behind the panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Official Raspberry Pi 5 Active Cooler and low-profile heatsinks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Panel mount only: mounting ears with slots on both sides; user makes the panel cutout (drawings and 3D model supplied)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Sandblasted black anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions\u003c\/strong\u003e: 155 × 101 × 26 mm; shipping weight 140 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: Raspberry Pi 5, Display 2 (5-inch), HATs, cooler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\u003c\/strong\u003e: 7350001162232\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFlush panel or wall installation for the 5-inch Display 2\u003c\/li\u003e\n\u003cli\u003eMounting ears with slots on both sides\u003c\/li\u003e\n\u003cli\u003eDrawings and 3D model supplied for the panel cutout\u003c\/li\u003e\n\u003cli\u003eRoom for HATs and the official Active Cooler on the rear\u003c\/li\u003e\n\u003cli\u003eSlim metal construction in sandblasted aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003eDesigned for panel mounting only – not for standalone use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB Cases","offers":[{"title":"Default Title","offer_id":55334459670862,"sku":"7350001162232","price":21.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0248\/6557\/0909\/files\/DSC03505.jpg?v=1770991328"},{"product_id":"kksb-case-stand-for-display-2-5-inch-and-raspberry-pi-5","title":"KKSB Case Stand for Display 2 (5 inch) and Raspberry Pi 5","description":"\u003cp\u003eDesktop case stand for the Raspberry Pi 5 and the official 5-inch Raspberry Pi Display 2, with a fixed angled metal stand, room for HATs and an external power button. Designed in Sweden by KKSB Cases.\u003c\/p\u003e\u003ch2\u003eSpecifications at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible board\u003c\/strong\u003e: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\u003c\/strong\u003e: Official 5-inch Raspberry Pi Display 2 (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible HATs\u003c\/strong\u003e: Most Raspberry Pi HATs; long and short spacers included for GPIO headers of different heights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort access\u003c\/strong\u003e: 1 × USB-C (power), 2 × micro-HDMI, 2 × USB 3.0, 2 × USB 2.0, 1 × Gigabit Ethernet, side access for a 40-pin GPIO ribbon cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower button\u003c\/strong\u003e: External button integrated in the case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Ventilation slots in both side panels; official Raspberry Pi 5 Active Cooler, low-profile heatsinks and compact coolers; included 40-pin stackable header leaves airflow between cooler and HAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e: Side ventilation panels can be removed for HATs with connectors in different positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand\u003c\/strong\u003e: Integrated metal stand with fixed viewing angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Sandblasted black anodized aluminium and powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage dimensions\u003c\/strong\u003e: 180 × 115 × 33 mm; shipping weight 330 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box\u003c\/strong\u003e: Case stand, long and short spacers, 40-pin stackable GPIO header\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot included\u003c\/strong\u003e: Raspberry Pi 5, Display 2 (5-inch), HATs, cooler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN\u003c\/strong\u003e: 7350001162225\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCombines the 5-inch Display 2 and Raspberry Pi 5 in one desktop unit\u003c\/li\u003e\n\u003cli\u003eFixed angled metal stand for touchscreen use\u003c\/li\u003e\n\u003cli\u003eRoom for most HATs – long and short spacers included\u003c\/li\u003e\n\u003cli\u003e40-pin stackable header for airflow between cooler and HAT\u003c\/li\u003e\n\u003cli\u003eExternal power button in the case\u003c\/li\u003e\n\u003cli\u003eRemovable side ventilation panels for HATs with side connectors\u003c\/li\u003e\n\u003cli\u003eCutouts for USB-C, 2 × micro-HDMI, 4 × USB and Gigabit Ethernet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB Cases","offers":[{"title":"Default Title","offer_id":55334611681614,"sku":"7350001162225","price":28.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0248\/6557\/0909\/files\/DSC03481.jpg?v=1770997269"}],"url":"https:\/\/kksb-cases.com\/collections\/display-cases-stands.oembed","provider":"KKSB Cases","version":"1.0","type":"link"}