Odroid C4 Performance Kit (32 GB Linux eMMC)

Current Price €140,94
Original Price €156,60
Save 10%

This kit includes the following items

  • 1x Odroid C4 (4GB RAM)
  • 1x KKSB Case for Odroid C4 with Fan
  • 12V/2A DC Power Supply Charger (EU Plug)
  • 32GB eMMC Module for Odroid C4 (Preinstalled Linux)

Odroid C4

  • Amlogic S905X3 12nm 2.8 GHz Quad-Core Cortex-A55
  • Mali-G31 MP2 GPU (650MHz) 4x Execution Engines
  • ARMv8-A with Crypto and Neon extensions
  • 4GiB DDR4 RAM | 32-bit | Low Power 1.2Volt Data Rate: 2640 MT/s | Grade: PC4-21333
  • 1x Micro SD Slot (Compatible with DS/HS mode and supports UHS-1 SDR104)
  • 1x eMMC Socket
  • 1x RJ45 GbE LAN Port | supports 10/100/1000 Mbps
  • Supports WiFi USB adapters (NOT INCLUDED)
  • RTL8211F Realtek Ethernet Transceiver
  • 1x HDMI 2.0 Port with HDR, EDID, CEC | up to 4K @ 60Hz
  • 1x SPDIF (OPTIONAL) Optical Output
  • 1x HDMI Digital Audio Output
  • 1x OTG USB 2.0 Port for Device or Host Mode (DOES NOT support Power Input)
  • 4x HOST USB 3.0 Ports (Single Root Hub Shared)
  • 1x 2.54mm Pitch 40-Pin Peripheral Expansion Header
  • 1x DC Power Jack: 5.5mm (negative / outer) and 2.1mm (positive / inner) diameter
  • 12V / 2A DC Power Adapter Recommended
  • Dimensions of the Heat Sink: 40mm x 32mm x 10mm | 4cm x 3.2cm x 1cm
  • Dimensions of the Board: 85mm x 56mm x 1.0mm | 8.5cm x 5.6cm x 1cm
  • Weight (including Heat Sink): 59 Grams

KKSB Metal Case for Odroid C4

  • Air-vents on top of the case for fan and along the case walls
  • Fan is included
  • Pre-cut holes for wall mounting and DIN Rail Clip (DIN Rail Clip is NOT included)
  • Rubber feet and screws included
  • Cutouts for ODROID-C4 connectors and GPIO Expansion Header

12V/2A DC Power Supply Charger

  • Switching mode adapter
  • 100V ~ 240V AC Input Voltage
  • 12V/2A DC Output Voltage
  • Adapter Type: EU Plug
  • Positive (inner) Diameter = 2.1mm
  • Negative (outer) Diameter = 5.5mm
  • Approximate cable length: 150cm

 

32GB eMMC Module for Odroid C4 with Preinstalled Linux

This 32GB card is configured to work with the ODROID-C4. It does not require a complex configuration since the Linux Operating System is already installed on it. This eMMC module is ready to work out of the box.

Storage Performance of 32GB eMMC Linux Module for ODROID-C4

  • Over 125MB/second Sequential Write Speed
  • Over 165MB/second Sequential Read Speed

The 32GB eMMC Linux Module for ODROID-C4 works fast even for the 4K random access.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)