2.23 inch 128x32p SSD1305 OLED Display HAT for Raspberry Pi and NVIDIA Jetson Nano I2C and SPI Interface

€24,90

Download 2.23-inch OLED User Guide

This 2.23-inch OLED Display HAT has been designed to work with Raspberry Pi and NVIDIA Jetson Nano. It features a 128x32 pixels screen and an onboard controller SSD1305 embedded driver chip. The 2.23-inch OLED Display HAT is compatible with the I2C and the SPI communication interfaces. By default, this OLED Display HAT is set to the SPI interface. However, you can configure the communication interface to I2C with the help of the onboard resistor. The 2.23-inch OLED HAT comes with a standard 40-PIN GPIO extension header that is suitable for Raspberry Pi and NVIDIA Jetson Nano.

Features of 2.23-inch 128x32p SSD1305 OLED Display HAT for Raspberry Pi and NVIDIA Jetson Nano

  • GPIO Extension Header: 40-PIN standard GPIO extension header suitable for Raspberry Pi and NVIDIA Jetson Nano
  • Interface (Set by Default): SPI communication interface
  • Onboard Resistor for Interface Configuration: You can configure this OLED Display HAT for the I2C communication interface
  • Host Board Support: STM32 and Arduino host boards supported through the onboard control pins
  • Development Resources: Manuals, development resources, and examples included for Raspberry Pi, Arduino, NVIDIA Jetson Nano, and STM32
  • Onboard Controller: Embedded SSD1305 driver chip
  • Display Size: 2.23-inch Diagonal
  • Display Resolution: 128x32 pixels
  • Content Display Color: White
  • Angular Range / Viewing Cone: 160o View Angle
  • Logic Level: 3.3V
  • Operating Voltage: 3.3V ~ 5.0V compatible
  • Weight: 19 Grams
  • Dimensions: 6.5 x 3.08 (cm) | 65.0 x 30.8 (mm)

Items Included

  • 1x 2.23-inch 128x32p SSD1305 OLED Display HAT
  • 1x Pack of Screw

Note: Raspberry Pi or NVIDIA Jetson Nano are NOT included

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)